A’ cruthachadh Segment airson Shantui Komatsu CAT
Leasachadh air a 'phròiseas togail
Le bhith ag atharrachadh bho dhà no trì fhiaclan gu còig fiaclan bidh sin a’ lughdachadh na tha de bhlocaichean fiacail a’ fuasgladh.Bidh atharrachadh a’ chearcall suidheachaidh gu bloc suidheachaidh a’ lughdachadh mhearachdan innealachaidh agus eadar-theachd eadar an cearcall suidheachaidh agus uachdar an stàlaidh air adhbhrachadh le deformachadh làimhseachadh teas.
Mar thoradh air a’ phròiseas cruthachadh, tha uachdar taobh agus flange anearrann anns a’ phròiseas cruthachadh dìreach feumar dreachd ceàrn sònraichte a chumail, agus feumar uachdar innealaichte an toraidh leth-chrìochnaichte cruthaichte a phròiseasadh.
Modail as urrainn dhuinn a thoirt seachad
| SEALLADH | ||||||||
| Modail | OEM | Pairc | Fiaclan | Hols | Fosgladh(mm) | Cuideam | Brand | OEM eile (BERCO) |
| DH08 | 111H-18-00001 | 154 | 3 | 3 | 17.5 | 4.1 | shantui | |
| 111H-18-00002 | 4 | 4 | 17.5 | 5.5 | shantui | |||
| SD13 | 10Y-18-00043 | 190 | 5 | 5 | 19.3 | 10.75 | shantui | |
| DH 36 | 1175-18-00009 | 228.6 | 6 | 6 | 26.5 | shantui | ||
| 1175-18-00035 | 5 | 5 | 26.5 | |||||
| SD16, D65, D60, D85ESS-2 | 16Y-18-00014H | 203.2 | 3 | 3 | 23.5 | 8.5 | shantui/komatsu | 14X-27-15112/1,141-27-32410,144-27-51150,615-4149,KM2111,KM162 |
| （16Y-18-00049) | ||||||||
| SD22, D85 | 154-27-12273A | 216 | 5 | 5 | 23.5 | 15 | shantui/komatsu | 155-27-00151,615-4150,KM224 |
| SD32, D155 | 175-27-22325A | 228.6 | 3 | 3 | 26.5 | 12 | shantui/komatsu | 175-27-22325/4 17A-27-11630,KM193,17A-27-41630 |
| SD52, D375 | 185-18-00001 | 280 | 5 | 5 | 28.5 | 33 | shantui/komatsu | 195-27-33110/1, KM1285 |
| SD90, D475 | 1189-18-00001/ | 317.5 | 5 | 5 | 31.5 | 43 | shantui/komatsu | |
| 198-27-42260 | ||||||||
| D50, D41, D58, D53 | 131-27-61710 | 175 | 3 | 3 | 19.5 | 6 | comatu | 131-27-61710, 131-27-42220, KM788 |
| D5B | 5S0836 | 175 | 3 | 3 | 18 | 5 | CAT | 6Y5244, CR4408.7P2636 |
| D6D/C/G | 6T4179/6T4179/6P9102 | 202.8 | 5 | 4 | 17.8/20.8 | 11.57 | CAT | 6Y5012,5S0050,7P2706,CR3330,CR3329,8P5837,8E4365/CR5476,117-1616 |
| D6H/R | 6Y2931/1026677 | 202.8 | 5 | 5 | 17.8 | 11.5 | CAT | 7G7212,8E9041,7T1697,CR5515,173-0946 |
| D7G/E/F | 8E4675/8E4675/8E4675 | 216 | 5 | 4 | 20.8 | 14.7 | CAT | 5S0052,3P1039,8P8174,CR3148 |
| D8N/R.D7H/R | 7T9773/6Y2354, | 215.9 | 5 | 7 | 20.8 | 16.4 | CAT | 6Y3928,CR5050,9W0074 |
| 6Y2354/7T9773 | ||||||||
| D8N/R.D7H/R | 314-5462 | 215.9 | 5 | 5 | 20.8 | 16.4 | CAT | CR7160 |
| D8K.D8H | 6T6782/6T6782 | 228.6 | 3 | 3 | 24.5 | 12 | CAT | 2P9510,5S0054,CR3144 |
| D6N.D6M | 6I8077/6I8077 | 190 | 5 | 5 | 18.5 | 9 | CAT | 6I8077/8,CR5875 |
| D9N | 7T1247 | 240 | 5 | 6 | 24.6 | 23.98 | CAT | CR4686 |
| D10N | 6T9537 | 260.35 | 5 | 6 | 27.61 | 26.7 | CAT | CR5047 |
| 832 | 632-7793 | 228.6 | 3 | 5 | 26.5 | 11.63 | CAT | |
HRC
Mar thoradh air a ’phròiseas cruthachadh, feumaidh uachdar taobh agus flange an earrann anns a’ phròiseas cruthachadh dìreach dreach ceàrn sònraichte a chumail, agus feumar uachdar innealaichte an toraidh leth-chrìochnaichte cruthaichte a phròiseasadh.
pacadh
